Issues When Updating or Installing Killer Control Center

 

Issues When Updating or Installing Killer Control Center

Users may encounter errors when installing or updating the Killer Control Center. 

If you encounter any problems, please select from the following options:

 

 

The Killer Control Center Cannot Automatically Update

 If the installer cannot automatically update, you might see an error, such as, but not limited to, this one:

Killer Performance Driver Suite Cannot Be Installed With

In this case, you will need to manually uninstall the previous versions. First, however, you will want to download the latest installer and have it handy. Once you have the installer ready to go, right-click Start, click Apps and Features, then find every entry that has "Killer" in it, including "Killer Drivers" and/or "Killer Performance Suite, or any variation, and uninstall them. After they have uninstalled, restart your machine, then install the latest suite.

 

Previous Killer Applications or Drivers Cannot Be Uninstalled
OR
There Are No Killer Applications or Drivers in The Apps and Features Menu But the Killer Control Center Will Not Install

If you encounter an issue where the old "Killer Suite" or "Killer Drivers" cannot be uninstalled, and they remain stuck in your Apps and Features menu, or they appear to be removed, but the latest Killer Control Center appears to attempt to install, then roll back, then there are a few ways to address this. Even if you can no longer see the old applications in your Apps and Features menu, it is very likely that they are still there, and that they are the problem. For very old previous installs, especially those that may be broken by updates from Windows 7 to Windows 10, we have developed a tool that can remove the old installs. Here is a step-by-step guide on downloading and using the tool. Use this as your first step in troubleshooting a broken older install:

  1. Download the Killer Remover from here - http://www.killernetworking.com/support/KillerRemover_v1.0.0.1.exe
  2. Right-click Start and click Apps and Features.
  3. Uninstall all "Killer" suites and drivers that will uninstall from this menu. 
  4. Close the Apps and Features menu and double-click the Killer Remover.
  5. Once it is finished, it will prompt you to restart your machine. Restart your machine, and check to see if the stuck item is removed from the Apps and Features menu

 

The Application is Still Stuck or The Latest Package Still Cannot Install After I Have Run the Killer Remover

The Microsoft Installer is probably encountering an error from which it cannot recover. Sometimes, you will get an error, such as "The feature you are trying to use is on a network resource that is unavailable..." or some other seemingly unrelated error, or the installer may fail with no error given other than it could not complete. Luckily, Microsoft has a tool to fix this issue, and you can find our detailed, step-by-step guide on how to find and use Microsoft's tool for fixing problems that block programs from being installed or removed- http://www.killernetworking.com/driver-downloads/kb/faq/34-error-2753-xtendsoftapservice. Make sure you choose "Uninstalling" even if you are trying to ultimately install the latest suite, as the problem is that you need to remove the remaining parts of the old software, even if they do not appear in  your Apps and Features menu. 

If you still have issues with the Killer Control Center's installer, or uninstalling older versions of the suites, please contact support, and we will be happy to help. If the installer is failing, please run the installer one more time, and include the log that is generated in your temp folder. You can access your temp folder by pressing Windows Key + R, typing %TEMP%...

 

winkey r temp

...and pressing Enter.

From there, sort by Date, and attach the most recent MSI***.LOG to your support request. It should be dated at the time you last ran the installer.

msilog

You can reach support by clicking below. Please also include information on any troubleshooting that you have already done.

Installing Bluetooth Drivers From Device Manager

 

In some cases, when there is no driver for your Bluetooth device, the Device Manager may mis-identify the Bluetooth device, or it may not identify it at all. In this case, you will need to install the Bluetooth driver from the Device Manager by following these steps:

  1. Run the installer but don't bother rebooting
  2. Verify that it created a folder called "C:\Program Files (x86)\Bluetooth Suite"
  3. In Device Manager, double-click the Bluetooth device, however it is currently named
  4. Under the Driver tab, click Update Driver
  5. Click Browse My Computer For Driver Software
  6. Click Let me pick from a list of device drivers on my computer
  7. Click Have Disk
  8. Browse to "C:\Program Files (x86)\Bluetooth Suite\driver"
  9. There should be only one option - atheros_bth.inf - click it and click Open
  10. Click Okay
  11. Select Qualcomm Atheros QCA61x4 Bluetooth 4.1 and click Next
  12. Click Yes on the warning popup
  13. Reboot after it finishes the install
  14. After the reboot, check Device Manager to verify that your Bluetooth device is now named Qualcomm Atheros QCA61x4 Bluetooth 4.1 and you should be good to go!

E2100, 2100, and Xeno Pro Drivers (Legacy Devices)

 

The E2100, 2100, and Xeno Pro are legacy devices, and no longer receive updated device drivers. Please contact the manufacturer of your Killer 2100, Killer E2100, or Xeno Pro for the latest drivers. The same driver (either 32bit or 64bit) works for each product. It has been confirmed that the latest drivers for Killer 2100, Killer E2100, or Xeno Pro can be downloaded on VisionTek’s support page at: https://www.visiontek.com/support/download-drivers.html. If you are using Windows 10, and Windows does not automatically install drivers for the device, the Windows 8.1 drivers should work for your application.

Support is no longer available for the Killer M1 and Killer K1.

Network Column in Windows Task Manager Not Working

 

For our software to display bandwidth correctly, Windows NDU (Windows Network Data Usage Monitoring Driver) ends up getting stopped/disabled. This is because both services work by examining packets, and both doing so at the same time can cause conflicts.

If you force NDU to run while Killer Control Center or Killer Network Manager is installed, those two programs may not display bandwidth correctly.

If you would like to re-activate the Windows NDU to test for yourself, open a Command Prompt and enter the following:

sc config ndu start=auto

After you enter that command, reboot your Computer.

NDU should now be set to start automatically and the Task Manager Processes tab should show traffic in the Network column, but the Killer Control Center or Killer Network Manager might not work properly.

To disable it, enter the following into a Command Prompt:

sc config ndu start=disabled

After you enter that command, reboot your Computer.

Have a question about your Killer product that isn't answered in our Knowledge Base?  Contact Us.